ArCADia > ArCADia BIM External Installations 

ArCADia BIM External Installations

 

 

ArCADia-POWER NETWORKS 2.0  Rp. 4.500.000

ArCADia-POWER NETWORKS is an industry-specific module of the ArCADia BIM system, based on the ideology of Building Information Modeling (BIM).

ArCADia-POWER NETWORKS allows the creation of professional documentation related to the design of external low-voltage power networks. The program enables object-oriented creation of drawings for external power networks in spatial development plans or the preparation of user drawings showing a power network starting from a low-voltage transformer to a distribution panel in a building.

FEATURES OF THE PROGRAM

  • NEW: The generation of structural diagrams of networks starting from the power source to the final object. The functionality can be used to quickly generate a drawing of the structural diagram of a proposed network, which is necessary for the design documentation. The diagram contains the topology of the proposed network.
  • NEW: Improvement of technical calculations by the introduction of the duty and impedance factors for the short-circuit loop to the “cable connector” structure, which enables short-circuit calculations of the internal supply line from the cable connector to the distribution board in the building as well as calculations of the load capacity of each section of the designed network.
  • NEW: The possibility to create survey coordinates in spatial development plans. Once survey points are marked, the user can generate a report on X and Y coordinates in an RTF file. The functionality is very useful when a designer has to present the survey coordinates of the planned network turning points to a Design Documentation Approval Team.
  • NEW: The cable joint box
  • NEW: The possibility to substitute a symbol view for a specific object and create user symbols for designed objects.
  • The program allows the object-oriented creation of drawings for external power networks in spatial development plans as well as preparation of user drawings showing a power network starting from a low-voltage transformer to the distribution panel of a building.
  • The designing of cable and overhead power networks.
  • The quick and efficient preparation of the design of a power connection to building facilities and the design of an external lighting system, e.g. lighting for streets, road, car parks, etc.
  • For each planned power line, the user can select protective devices for short circuits and overloads using the library of protective devices or creating their own objects.
  • A rich library of objects and the possibility for the user to create their own items.
  • The execution of all basic calculations for a network.
  • Generation of professional technical documentation and bills of the materials used in the design for further processing.  

ArCADia-TELECOMMUNICATIONS NETWORKS 2.0  Rp. 10.500.000

ArCADia-TELECOMMUNICATIONS NETWORKS is an industry-specific module of the ArCADia BIM system, based on the ideology of Building Information Modeling (BIM).

ArCADia-TELECOMMUNICATIONS NETWORKS is a program to create professional industrial documentation for designs of external telecommunication networks (fibre-optic and copper media). The program is intended for designers of external telecommunication networks and design-construction companies that produce network concepts, industrial drawings, take inventory of existing networks and to all associated with the telecommunications industry.

It is another industrial module of the ArCADia BIM system, and as with all previous modules, it can be operated as an overlay for the AutoCAD program. Any user of ArCADia-TELECOMMUNICATIONS NETWORKS can quickly create drawings of external telecommunication networks in spatial development plans or produce their own drawing showing an existing or design network in terms of its passive components.

Due to the specific nature of the design of external telecommunication networks (the necessity to construct or extend primary and secondary telecommunication cable ducting systems, cable pipelines, existing or planned overhead lines, reconstruction of existing cables), the program covers the design of fibre-optic and copper-media cables in connection with the aforementioned network elements. The program is intended for designers of external telecommunication networks. However it can also be used by design and construction companies providing concepts of telecommunication networks, producing industrial drawings, taking an inventory of existing networks and by all those associated with the telecommunication industry. The program provides a comprehensive listing of the basic materials used to construct telecommunication networks, including cables and terminations for fibre-optical and copper-media cables in terminal facilities.

The object library can be used to design a telecommunication network. Objects can be edited and assigned parameters. Apart from the possibility to produce drawings and diagrams in an efficient way, the program performs the calculations necessary for the correct design of a network. The combination of specialist functions used in this application and the possibility to perform calculations and verifications of designed networks provides a perfect tool to create designs of telecommunication networks using fibre-optic and copper-media cables.

The ArCADia-TELECOMMUNICATIONS NETWORKS program enables the design of external telecommunication networks on the route: a main distribution frame (cable start completion: distribution frame, external cabinet, cable box) – a telecommunication line route – optic distribution frame (cable end completion: distribution frame, external cabinet, cable box, cable termination in a building), as well as any network configuration, including its division into component elements.

FEATURES OF THE PROGRAM 

  • The design of primary and secondary underground cable systems, cable pipelines.
  • The design of overhead lines.
  • The designing of fibre-optic and copper-media cables (including telecommunication and coaxial cables) using a proposed or defined existing telecommunication infrastructure.
  • Verification of the designed individual sections of a cable, a selected cable line and the connections of the remaining components of the design.
  • The generation of calculation reports, such as attenuation analysis, lists of cable sections, cable route description, listing of primary and secondary cable ducting system sections.
  • The generation of cable route diagrams, a primary cable ducting system diagram, cable pipeline, listing of project materials or selected line materials.
  • A report for the selected object or a group of objects.
  • The export of the bill of materials to cost estimate programs.

The program provides a full opportunity to begin and end work in any location of a network. In addition, the program can be used only to design a primary cable ducting system, cable draw pit or a section of a cable pipeline. Due to the required order of construction of a new network or the extension of an existing network (first, the cable conduit of a ducting system or a cable pipeline should be constructed, and then, cables can be placed in them or an overhead network can be erected), the only restriction on designing telecommunication cables is to first define the aforementioned components of the network. When external cable lines are designed on spatial development plans, a designer can quickly obtain a list of survey coordinates (in the form of an RTF report) in critical network points (line turning points, cable draw pits, overhead line poles, cable containers). The program also provides the possibility to perform basic calculations and generate reports and verify designed network elements. 


ArCADia-TELECOMMUNICATIONS NETWORKS 2.0 MINI  Rp. 2.200.000

ArCADia-TELECOMMUNICATIONS NETWORKS MINI is an industry-specific module of the ArCADia BIM system, based on the ideology of Building Information Modelling (BIM).

ArCADia-TELECOMMUNICATIONS NETWORKS MINI enables the development of the design documentation for external fibre-optic and copper telecommunications networks. The program is intended primarily for the design engineers of external telecommunications networks and for design and contracting companies that deal in developing network concepts, industry-specific drawings, compiling an inventory of the existing network and for all persons working in the telecommunications industry.

The limitations of the ArCADia-TELECOMMUNICATIONS NETWORKS MINI program in comparison to the full version: 

  • commands for generating calculation reports and overviews that are not available:
    - overview of cable chambers
    - overview of primary sewage system sections
    - overview of surveying points coordinates
    - description of the fibre-optic cable route
    - overview of fibre-optic cable sections
    - analysis of the fibre-optic cable damping
    - description of the telecommunications cable route
    - overview of telecommunications cable sections
    - analysis of cable tracks damping and impedance
    - insertion of lists of profile contents and lists of connectors in structures: not available
  • Mapping of the module’s structures in a 3D view: not available
  • Possibility of detecting collisions within the module’s structure: not available.

ArCADia-EXTERNAL GAS INSTALLATIONS 1.7  Rp. 7.300.000

ArCADia-EXTERNAL GAS INSTALLATIONS is an industry-specific module of the ArCADia BIM system, based on the ideology of Building Information Modelling (BIM). The program can be used to produce professional design documentation of a gas connection, including an external gas system.

The program is intended for both gas network and system designers and all people associated with the plumbing and installation sectors in civil engineering. It can be used for the object-oriented creation of drawings of gas connections and external gas system elements (located outside a building or a group of buildings). The design can be realised on spatial development plans in the form of cadastral base maps or the user’s own drawings representing an existing or proposed network.

The ArCADia-EXTERNAL GAS INSTALLATIONS program provides the possibility of the automatic creation of design diagrams and longitudinal profiles for pipeline routes, including system elements. The program calculates the data necessary for the correct design of a system in terms of verification of the correct pipeline diameters and determination of pressure drops in design sections.

Features of the program 

  • The generation of drawings of external gas system as regards pipeline routes, shut-off fittings, locations and dimensions of free-standing and wall-mounted gas boxes.
  • The creation of profiles and design diagrams.
  • The determination of gas flow in sections of external gas system lines.
  • The calculation of pressure drops in external gas system lines.
  • The verification of a designed gas system for correctness.
  • The generation of design reports.
  • The generation of ready-made bills of materials.
  • The generation of hydraulic calculations.
  • The possibility of the quick and simple addition of databases to the main program library and the selection of folders to be used in a given system design.
  • The generation of bills of materials used in the project.
  • The export of the bills of materials to cost estimating programs.